Vector™ Hair Removal System
The most respected name in electrolysis
The Vector™ Hair Removal System has been designed for use in professional salons or forhigh-performance hair removal at home. It is the only hair removal system on the market
that has the same output power as professional electrolysis machines.
This machine will save you hundreds of dollars on electrolysis sessions
that you can now perform in the privacy of your home. Professional salons can begin offering
permanent hair removal services for a very low start-up cost.
Unlike other hair removal devices that use radio frequencies and batteries,
the Vector™ uses the process of electrolysis to dissolve the hair follicle by producing
sodium hydroxide in the hair shaft.
The Vector™ System removes one hair at a time with the included galvanic tweezers.
The Vector™ permanently removes even the coarsest hair.
Professionals should use the optional foot pedal accessory.
A license is required to operate the Vector System with a traditional electrolysis needle.
WARNING:
Hair removal achieved by the Vector System is irreversible.
Please plan carefully the areas that are to be removed.
Set Includes:
• Vector™ Professional Electrolysis Machine
• Foot Pedal
• Surgical-Grade Galvanic Tweezers
• 8 Electrode Patches
• 2 oz . Tube of Conductivity Gel
• Patch and Tweezer Cords
• Quick Setup Guide
• AC Cord
The Vector System and all its accessories come with a 1 year manufacturer's warranty.
WARNING:
- Please read the user's manual carefully before attempting to use this device.
- Do not attempt to exceed the appropriate power level: Excessive power applied to any area being
treated may result in burns, scabbing, scarring, and other types of permanent skin damage.
Please determine safe power levels for your application.
- Keep this device and all of its accessories away from children.
Any individuals under 18 years of age must use this device under adult supervision.
- As with most electrical appliances this device contains "live" electrical parts when plugged in.
To reduce the risk of death by electric shock:
1. Always unplug this device after use.
2. Do not use or store this device where it can fall or can be pulled in to a tub, toilet, or sink.
3. Do not use while bathing.
4. Do not use near or place in water.
How Does Electrolysis Work?
Needle ElectrolysisElectrolysis is a process in which a needle is inserted into the hair shaft and then an electrical current
is passed through the hair follicle. Although hair itself is dry, below the surface of the skin it is
immersed in a watery environment with a high mineral content. The electrical current from the
needle causes a chemical reaction and turns the water and salt in the hair follicle into sodium hydroxide.
This sodium hydroxide dissolves the hair follicle and the papilla causing a complete and permanent
destruction of hair growth. Even though this is a highly effective procedure, it is also has many drawbacks.
First of all, the insertion of a needle into the skin over and over again can be quite painful.
Treatment with a needle also requires a high degree of skill; the technician must guide the needle
very accurately to reach the bottom of the hair follicle. Penetrating the skin with a needle also
increases chances of infection.
Vector Electrolysis
As it turns out, it is completely unnecessary to insert a needle to produce sodium hydroxide in the
hair follicle. The Vector™ machine works by simply grasping the hair with tweezers and applying a
highly conductive gel with silver chloride. Without the electrically conductive gel this process
would not work, as hair cannot conduct electricity. Applying silver chloride gel to the hair
above the skin allows electrical current to pass over the non-conductive portion down
into the hair follicle. (Professionals can use the Vector System with a traditional electrolysis needle
in place of the galvanic tweezers. Operating the Vector System with a needle requires a license.)
Treatment
1. Place the Unitab patch electrode anywhere on the body where it does not obstruct the treatment areas.
Attach the included alligator clip to the Unitab electrode and plug the other end into the
color-coded input of the Vector machine.
2. Plug the tweezers into the other color-coded input.
3. Coat the hair that is to be treated with the conductivity gel all the way down to the skin using a Q-tip.
4. Grasp the hair with the tweezers at the base. Gently pull the hair away from the skin until the tweezers are only touching the hair and not the skin. See Quick Setup Guide (also called User Manual) for more details.
Vector Hair Removal System
VECTOR$199.95
 For Your Security |
TO SEE YOUR SHOPPING CART CLICK BUTTON  We accept payment by credit card, echeck, as well as personal checks and money orders made payable to Ecclecstacy Arts™ |
Thank You for Shopping at ECCLECSTACY ARTS™ All content © 2003-2006 Ecclecstacy Arts ™ |
|||
|
|||||
| Questions? Click Here |